Finely adjustable servo with built-in DCC decoder, can also be used in analog mode.
Compatible with any NMRA DCC system
Programmable address range: 1-2048
Freely usable 2-pole outputs (NC / NC) with locking relays
Simple reset of the decoder by programming the value 8 in CV 8
Endpoints of the servo for turnout switching can be programmed in CV38.
Address programming mode or continuous programming mode
Programmable speed and rotation time
scope of delivery
1x TD servo motor in holding device
2x fastening screws
1x 100 mm adjusting springs made of spring wire with a diameter of 0.8 mm
1x 100 mm adjusting springs made of spring wire with a diameter of 1.0 mm
Technical specifications
Connection: 8-24 volt track voltage (DCC)
Maximum power consumption: <50 mA
Maximum output voltage: 1 A
Dimensions: 60 x 44 x 33 mm (L x W x H) including mounting frame
Weight: 50 g
Protection class: IP00
Operating temperature: 0 to +60 ° C
Storage temperature: -20 to +60 ° C
Ambient humidity: max 85%
ATTENTION! The programmer does not come with a printed manual. Please download the operating instructions under the "Documents" tab on this page.